Calacatta Storm Quartz Polished Stone Slab | 3100x1600x20mm
Genuine RHF Marble Effect Stone Benchtop Slab Calacatta Storm
Slab size: 3100 x 1600 x 20mm
We supply & Install all types of RHF stone benchtops, splash backs & feature panels. Ask us about fully customised benchtops to suit your exact requirements cut and polished by our expert stone mason.
RHF Quartz Stone
Our stone can be used for kitchen benchtops, island bench, splashback, commercial bar table, commercial kitchen, counter tops, reception table, bathrooms, flooring, shower and much more.
RHF Stone offer 15 years limited warranty and we can mail by post or email the application. Please fill out the form and return to us within 60 days from the date you received the form to guarantee the warranty.
The appearance of each slab will also vary depending on lighting conditions, placement and viewing angle. Different batch number on each product are likely have a different colour tone, RHF Quartz Stone do not recommend doing joining on your benchtop with a different batch number.
Genuine RHF Stone Product
GBWarehouse distributes only Genuine RHF Quartz Stone Products which will have a code at the back of each slab that is visible to see and confirm authenticity.
Cleaning & Maintenance
RHF Quartz stone is designed non-porous, surface which not need polishing or sealing.
Keeping your RHF Stone clean is simple and easy, recommended to use a soft cloth and apply some neutral household liquid detergent (avoid using any high pH products such as an oven cleaner). If RHF Stone are in contact with cleaning products that content bleach, acid or high pH chemical, rinse immediately to avoid further damage to the stone surface.
For deeper cleaning on your benchtop surface recommended to use nonabrasive cream cleanser mixed with warm water, gently wipe the entire surface or use a soft non-scratch cloth to very gently rub where you think that might be stained, remove all cleaning product and wipe down with clean warm water then use a dry non-scratch cloth to dry up the surface with your original shine. Never excessively scrub or rub heavily on your benchtop as this can or may cause dulling to the stone surface.
Hot pots and pans with amount of heat should never be placed on the RHF Stone has high heat resistance(120 degree heat), excessive localised heat may result in damage to your RHF Stone due to thermal shock.
RHF Quartz Stone recommend appropriate cutting board when cutting and not directly to the stone surface to avoid blunt knifes or object damaging the stone service.
Frequently asked questions...
Is RHF stone stain resistant
Yes, but high pH chemical, bleach or acid will damage the stone surface.
Do I need to rebuff the benchtop?
No, general everyday cleaning with a warm soapy cloth, rinse and dry will keep RHF Quartz Stone look as new every day.
Can I put a hot pot or pan direct on the benchtop?
Hot pots and pans with amount of heat should never be placed on the stone surface, it is always recommended to use a stand or trivet. A good rule for heat is, if your hand cannot tolerate the heat means the heat from the source is too high to place on the RHF Quartz Stone surface.
Can we use RHF Stone at my fireplace?
RHF Quartz Stone is tested and certified at 120 °C heat, it is designed for decorative use and should never be place inside of a firebox. You should always consult with the manufacturer of the fireplace to ensure that the maximum heat does not exceed this temperature.
Can I get a quote?
Please call 03 9798 8888 or firstname.lastname@example.org to obtain a custom quotation. We also offer in-house measure and quote for complete kitchen renovation clientele.
Can I get a thicker edge?
Yes you can.
RHF Quartz stone slabs have 20mm Standard thickness but we are able to resize the edge (waterfall) through the services of our fabrication contractor.
Is the joining visible?
No, all work is expertly performed and none of the join lines are obvious or visable.
What is the durability of RHF Stone?
Like most materials, excessive force, loads, pressure or heat may cause damage to the surface. RHF Quartz Stone should always handle with care like all other materials.
Can I cut on my benchtop top?
RHF Quartz Stone is scratch resistance, but still RHF Quartz Stone recommends to use appropriate cutting boards when you are doing your cuttings to avoid any blunt knife or objects damaging the surface.
Can it be used outdoor?
If used in an outdoor environment, the RHF Quartz Stone 15 years Limited. Warranty is not applicable as our Stone is not UV ray approved.
Our warehouse is located in Dandenong, Victoria and we offer express same and next day transport throughout Melbourne and regional Victoria.
Approx Shipping Times:
Melbourne Metro: 24-48 hours
Regional Victoria (within 200km): 2-3 days
NSW, SA and QLD: 2-5 days
We also offer shipping interstate to QLD, NSW, SA and TAS. Due to the size and weight of products such as flooring we recommend obtaining a shipping estimate before placing an order so we can determine the best possible rate and carrier. Obtain an estimate by sending us a message with items your after and your postcode. Estimates are normally available within 24 hours.
Yes, send us a message with details of items your after and we will contact you to organise delivery of samples where available.
We accept COD, Bank Transfer, Visa, MasterCard, American Express, Apple Pay, Google Pay and offer Afterpay to approved clients.
View our returns, refunds and exchange policy here.
Yes, we provide a full range of services including tiling, removal of existing flooring, hybrid and laminate installation, kitchen renovations etc. Get in touch with us for more information.
Yes, most items include comprehensive warranties. See product specifications for warranty details or get in touch with us for more info.